Janos Lendvai

Director of the Institute and Head of Department
Institute of Physics, Department of General Physics
Eötvös Loránd University, Budapest
E-mail: lend@ludens.elte.hu
Page: http://metal.elte.hu/~lendvai/index.html

Fields of interest:

  • Materials Physics

 

Recent publications (selected):

N.Q. Chinh, J. Gubicza, Zs. Kovács and J. Lendvai:
Depth-sensing indentation tests in studying plastic instabilities,
J. Mater. Res., Vol. 19, (2004), pp. 31-45

D. Fátay, J. Gubicza, P. Szommer, J. Lendvai, M. Blétry, P. Guyot:
Thermal stability and mechanical properties of a Zr52.5Al10Cu27Ti2.5Ni8 bulk amorphous alloys,
Mater. Sci. Eng. A, Vol. 387-389, (2004), pp. 1001-1004.

M. Henžel, J. Kovalčík, J. Dusza, A. Juhász and J. Lendvai:
Micro and nano-indentation of MoSi2,
J. Mat. Sci., Vol. 39, (2004), pp. 3769-3772.

Cs. Kádár, E. Maire, A. Borbély, G. Peix, J. Lendvai and Zs. Rajkovits:
X-ray tomography and finite element simulation investigation of the indentation behavior of metal foams,
Mat. Sci. Eng. A, Vol. 387-389, (2004), pp. 321-325.

Cs. Kádár, F. Chmelik, Zs. Rajkovits and J. Lendvai:
Acoustic emission measurements on metal foams,
J. Alloys Comp., Vol. 378, (2004), pp. 145-150.

P. Kenesei, Cs. Kádár, Zs. Rajkovits and J. Lendvai:
The influence of cell-size distribution on the plastic deformation in metal foams,
Scripta Mater, Vol. 50, (2004), pp. 295-300.

Zs. Kovács, A. Castellero, A.L. Greer, J. Lendvai and M. Baricco:
Thermal stability and instrumented indentation in a Mg60 Cu30 Y10 bulk metallic glass,
Mat. Sci. Eng., Vol. A387-389, (2004), pp. 1012-1017.

K. Máthis, Z. Trojanová, P. Lukáč, C.H. Cáceres and J. Lendvai:
Modeling of hardening and softening processes in Mg alloys,
J. of Alloys Comp., Vol. 378, (2004), pp. 176-179.

M. Shapaan, J. Gubicza, J. Lendvai and L.K. Varga:
Crystallization behavior of (Fe100-xCox)62Nb8B30 bulk amorphous alloy,
Mat. Sci. Eng. A, Vol. 375-377, (2004), pp. 785-788.

M. Shapaan, A Bárdos, J. Lábár, J. Lendvai and L.K. Varga:
Thermal stability and glass forming ability of cast iron based CiPxB4.35 amorphous alloys,
Phys. Stat. Sol. A, Vol. 201, (2004), p. 476.

B. Baretzky, M.D. Baró, G.P. Grabovetskaya, J. Gubicza, M.B. Ivanov, Y.R. Kolobov, T.G. Langdon, J. Lendvai, A.G. Lipnitski, A.A. Mazilkin, A.A. Nazarov, J. Nogués,
I.A. Ovidko, S.G. Protasova, G.I. Raab, Á. Révész, N.V. Skiba, J. Sort, M.J. Starink,
B.B. Straumal, S. Surinach, T. Ungar and A.P. Zhilyaev
:
Fundamentals of interface phenomena in advanced bulk nanoscale materials,
Rev. Adv. Mater. Sci., Vol. 9, (2005), pp. 45-108.

N.Q. Chinh, Gy. Horváth, Zs. Kovács, A. Juhász, Gy. Bérces and J. Lendvai:
Review on Kinematic and dynamic characterization of plastic instabilities occuring in nano-and microindentation tests,
Mat. Sci. Eng. A, Vol. 409, (2005), pp. 100-107.

Gy. Horváth, N.Q. Chinh and J. Lendvai:
Solute concentration dependence of strength and plastic instabilites in Al-Mg Alloys,
J. Mat. Res., Vol. 20, (2005), pp. 1-7.

Á. Révész, A. Cziráki, A. Lovas, J. Pádár, J. Lendvai and I. Bakonyi:
Structure and thermal stability of a melt-quenched single-phase nanocrystalline Hf61Fe39 alloy,
Z. Metallkd., Vol. 96, (2005), pp. 873-878.

Á. Révész, L. Nagy, G. Ribárik, Zs. Kovács, T. Ungár and J. Lendvai:
Microstructural evolution in mechanically alloyed nanocrystalline Al-20at.% Mg alloy,
J. Metastable and Nanocrystalline Materials, Vol. 24-25, (2005), pp. 149-152.